ASTM Standard
The titles and scope of each current standard is listed on this page. Due to ASTM regulations and copy right restrictions, we may only distribute hardcopies of the full standards and not electronic versions. For electronic versions of these standards, please go to the ASTM website.
ASTM C1091-2003 Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
This test method defines procedures for hydrostatic infiltration testing of new installations of vitrified clay pipe lines, to demonstrate the structural integrity of the installed line. Refer to Pra...
ASTM C1208-2004 Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting
This specification establishes the criteria for the manufacture, quality assurance testing, inspection, installation, field acceptance testing, and product marking of vitrified clay pipe to be used in...
ASTM C12-2004 Standard Practice for Installing Vitrified Clay Pipe Lines
This practice covers the proper methods of installing vitrified clay pipe lines in order to fully utilize the structural properties of such pipe. The values stated in inch-pound units are to be reg...
ASTM C301-2004 Standard Test Methods for Vitrified Clay Pipe
These methods cover the equipment for, and the techniques of, testing vitrified clay pipe prior to installation. Tests using whole pipe determine the resistance to crushing and hydrostatic forces. T...
ASTM C425-2004 Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings
This specification covers materials and test requirements for compression joints for vitrified clay pipe and fittings. See Specification C700 for pipe specifications. The test requirements are appli...
ASTM C700-2005 Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength and Perforated
This specification establishes the criteria for acceptance of extra strength and standard strength clay pipe and fittings to be used for the conveyance of sewage, industrial wastes, and storm water; a...
ASTM C828-2003 Standard Test Method for Low Pressure Air Test of Vitrified Clay Pipe Lines
This recommended practice defines procedures for testing vitrified clay pipe lines (4” to 12”), using low-pressure air, to demonstrate the structural integrity of the installed line. This test meth...
ASTM C896-2004 Standard Terminolgy Relating to Clay Products
Standard Definitions of Terms Relating to Clay Products.
The article you have requested is only available to registered members.
Becoming a registered member is easy and is free. All you need to do is
fill in our registration form